All our products

LAMSE designs, develops and manufactures instruments for detecting and measuring the ambiental radiation and the radioactive contamination.

In field and according to the application, different requirements can be needed. Among our products there are instruments to detect and measure different kinds of radiation and particles (alpha, beta, gamma,...), handheld, stationary, compact, multiprobe, with or without data register, etc.

Please, contact us if you have any question about our products or you need advise about what is the most appropiate instrument for your application.

New products

The ERiS2-M/G and ERiS2-R are the last models to join our portfolio. They are handheld and lightweight monitors for detecting and masuring different types of ionizing radiation. The ERiS2-M/G is a multisonde monitor in which ambient radiation and radioactive contamination probes can be connected.

The RD1W and RD2W are the last models of probes to join our portfolio. The most important aspect of these models is they are waterproof. They can be used outdoors in any weather conditions and, also, to detect gamma radiation under the water. These probes can be connected to the ERiS2-M/G multiprobe monitor, to the LAM35 module, or to the RM1001B-RD Area monitor.

Gamma and X-Rays radiation

They are instruments designed to detect gamma and X-Rays radiation, measuring dose rate and accumulated dose in International System units (Sievert, Sv).

If a small and compact instrument is required then the ERiS2-R and ERiS2-D are appropriate. If a more complet and versatile instrument is needed then the ERiS2-M/G will adapt to those requirements.

The RM1001B-RD is an Area monitor with a built-in Alarm Beacon. Is is available a model with data memory with the possibility to form a measuring network.

The RM1001B-M0 has a very high sensibility to detect any gamma source in packets, bins, persons, etc. Other models are the RM1001-RD and the LAM35. This last one allows the measure with four sondes simultaneously.

Alpha, Beta, Gamma Contamination

They are instruments to detect and measure alpha, beta and gamma radioactive contamination. In general these instruments in counts per second unit (CPS), although there are models with a small isotope library to measure in units of Activity (Bq) and superficial Activity (Bq/cm²).

If a small and compact instrument is needed, then the ERiS2-D is the most appropriate. And it will adapt to the requirements better, if it is also needed to measure the ambiental gamma radiation.

The ERiS2-M/G monitor and its sondes for contamination allows to check surfaces and to search for radioactive sources. The RM1001-CT is a portable and desk monitor with a window detector of 15 cm², very appropriate for laboratories. It has some options of detectors.

Handheld and portable instruments

Sometimes it is necessary to measure the ambiental radiation level at different localizations or to check possible radiactive contamination in surfaces, tools, etc. so that portable instruments are required.

The ERiS2 models are the most small and compact in this catalogue.

The ERiS2-M/G multiprobe monitor and its interchangeables sondes make a very complete and versatile measuring portable system.

The RM1001-CT and RM1001-RD are portable and desk monitors, very appropriate for laboratories. It has some options of detectors.

Área instruments

The Area or stationary monitors are designed to measure the level of radiation at a localization.

The RM1001B-RD is an Area monitor with a built-in Alarm Beacon. Is is available a model with data memory with the possibility to form a measuring network.

The RM1001B-M0 is a monitor very easy to move which has a very high sensibility to detect any gamma source in packets, bins, persons, etc.

The RM1001B-CT is an Area monitor to detect radioactive contamination. The special designed wall-holder, for the probe of great detection area, allows to check the hands without touching the probe and avoiding in this way possible contaminations.

Multiprobe instruments

Measuring equipment that can be connected to various sensors which can be interchangeable, or for simultaneous measurement at different points.

The Multiprobe monitor ERiS2-M/G and interchangeable probes make a complete and versatile system. It has radiation probes with different ranges and sensitivity, and probes of different sizes and contamination detection capabilities.

The measuring module LAM35 allows connection of up to 4 probes for radiation measurements simultaneously.

Data logging instruments

In some applications it is necessary to record the measurements obtained for further computer analysis, or to monitor the measuremets on-line, etc.

The Multiprobe monitor ERiS2-M/G and interchangeable probes make a complete and versatile system. It has radiation probes with different ranges and sensitivity, probes of different sizes and contamination detection capabilities.

The RM1001B-RD is an Area monitor with a built-in Alarm Beacon. Is is available a model with data memory with the possibility to form a measuring network.

The LAM35 measuring module allows connection of up to 4 probes simultaneously for radiation on-line measurement and register in PC.

Samples measuring

They are equipment or system to measure radioactive samples, as frotis filters, ashes, etc. which have the feature of long measuring time and shield systems to reduce the background

The RM1001B-A0 is a system consisting in a analogic and digital counter-timer. The measuring mode is "contaminated / not contaminated" and it uses a very high sensibility probe with a scintillation detector and a shield of lead to reduce the backgound and the minimun detectable radioactive activity.

Although the ERIS2-M multiprobe monitor, the RM1001-CT, and the RM1001B-CT are not specific to this, they can work as a counter-timer to be able to measure frotis in field.